Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I currently have two 3560 L3 switches running HSRP and etherchannel between them. These core switches are configured with separate vlans for different traffic such as (iscsi,nfs,vmnet,network,server) and all nodes are plugged in to the core. Since th...
I have a design question regarding configuring OSPF for two sites. Say, Napa and Sonoma. I All traffic not local to Sonoma including 0.0.0.0 needs to be routed through Napa over a private wan link.Would creating a stub area for Sonoma be the solution...
I am planning a backup connection to a main site if our primary link goes down via two ASAs using a site to site vpn.This is what I have come up with so far and just need to work through some best practice and questions.##Regular Connectivity, and I...
So if the wan link goes down, Sonoma would use the local internet source and if the Napa ASA or internet souce goes down i guess the internet would route out of Sonoma. That way if we lose any device we should still function albiet over unpreferred l...
Looking at this document it seems as if running ospf over an existing ipsec vpn is supported without the need for gre between the routers.http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00804acfea.shtmlIs tha...
I think I may like this idea of a separate dedicated to iscsi which would make it much simpler.Although we are new to iscsi, maybe i can just use the switches for the storage network being a vlan for nfs and two for iscsi.
Yes these are 2948s and thanks for you letting me know the forwarding fabric.I checked and my 3560 has 32GBs and the 2948 does have 20GBs.Since it would only allow 20 connected ports of the 48 ports would it not be considered a non-blocking switch?ST...
