Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
The WLC 2504 has two SSID, both on the management interface. Both WLAN are identical confirguration except for SSID and password.On the first WLAN, I am able to connect without any trouble.On the second WLAN I am unable to connect. iPad returns a "Un...
I have just replaced several WAP321s with a WLC2504 and 2x 2702i and 1x1702i. All works fine apart from one 802.11b device that connects to the WLC but does not authenticate. This device has a static IP and connects okay, but shows on the client list...
I have just purchase a Cisco 2504 along with two 2702i and one 1702i. The WLC works fine with both 2702i. Unfortunately, it won't locate the 1702i. I have just see that the problem could be that the 2504 is running software 7.6.120.0 and that I shoul...
Hi George Thanks for your reply. I'm using just WPA+WPA2 with Fast Transition. Under WPA+WPA2 parameters, only WPA2 Policy-AES is ticked. For Authentication, PSK and FT PSK are ticked with an 8 character ASCII password. The policy management state is...
Thanks for your help Scott. It does appear to be a DHCP issue. I know that the WLC does not allow static IP addresses on the "guest" SSID. However, this isn't a guest SSID. I can't think of any other options that should be checked / unchecked to make...
