Hello guys, i'll try to be as clear as possible with that issue.
We have the next network (simplified just with affected device):
c2960 ----conected to-----c4500 (as CORE)-----conected to----ASA
Users/Management network: 192.168.123.0 /24 (vlan 1...
Yes, it seems that SNMP third party monitoring is really limited.What TAC told me is that if you want or provide your network for full capabilities you need the Cisco DNA Wireless software. In my case, we have SolarWinds and just some parameters coul...
Right now i'm deploying a network renewal, and found the issue everytime i turn on my devices (not AP is capable to join the controler).It's an issue with time, don't know why. The time it shows is around March 2023, when the AP was manufactured. Wel...
Wow, you clarified that concept pretty much. All clear now.
Let me ask you one more question. Let's suppose that instead of a 2960 we have a SG500. Cisco SG series are prepared for web management, and really user friendly. In the same scenario, could...
Hello again Miller,
Let me show some of the output i obtained:
#show ip arp vrf vrf_insideProtocol Address Age (min) Hardware Addr Type InterfaceInternet 192.168.123.22 7 3c4a.92b2.3658 ARPA Vlan1Internet 192.168.123....
Hello Miller and thanks for your reply
As you spotted, the issue seems to be around VRF
For some reason the "ip route vrf vrf_inside 192.168.123.0 255.255.255.0 192.168.123.200" statement is missing. I must admit that i'm not used with the VRF comma...