About phusein

phusein · 10-13-2011

Hi All,Firstly apologies if i've put this into the wrong section. Secondly thanks in advance for your input.I'll first describe the setup and then what we are trying to achieve. Hopefully someone will be able to help.We have a UC560.Users have an ext...

phusein · 08-04-2011

Hi,Firstly i apologise if a) this question has already been asked b) this is the wrong forum. I've asked it here because i just can't find the answer !!!Anyway, my thanks in advance for your advice on this.We have a UC560 system. The UC has a SIP con...

phusein · 06-29-2011

Hi all,We have a site with a UC560 with a number of SPA504G phones attached.The site has a SIP connection on which it makes outbound calls.We would like to add a "9" to all missed or received calls under the directories button on the phones.I can't s...

phusein · 06-10-2011

Hello All,Really strange problem, and was wondering if anyone has cme across a similar situation... We have a Cisco UC560 in the UK. There are remote workers who have laptops. On there laptops they have a IP Softphone running (the latest version)The ...

phusein · 06-09-2011

Hi,I have some old Polycom Soundstation 2's and Sounpoint Pro Se225's. These are both analog phones.We've recently installed a UC560 on the LAN.Is it possible to use the Polycom's with our new UC system?If so what equipment do i need?Is there any spe...

phusein · 08-08-2011

Thanks to Steven.There was an entry in the dial plan that was sending calls destined for 0844 to the ISDN. I changed that to go over the SIP.Renato,In answer to your question. We know that calls were being routed over the ISDN, from the call charges ...

phusein · 06-29-2011

Hi Marcus,Thank you so much for your response.If we can't do it via the CCA, is it possible via the CLI? Do you (or anyone else) a sample configuration?ThanksPH

phusein · 06-10-2011

Excellent thought... thanks... but unfortunately i've checked that.The source interface for the TFTP server is Vlan 90. Vlan 90 has an ip address of 10.1.10.2 255.255.255.252.We can ping and traceroute to that address from the remote site laptop just...

phusein · 06-08-2011

Thanks for the reply...So just to be clear... i can set up a dial peer between the two UC560's...across an ipsec VPN.Then is is possible to route calls that have a US dial code prefix (001) across this ipsec VPN?Thanks again.PH

phusein · 04-08-2003

Hi Mike,The lmi keepalives are enabled by default on the interface, regardless of whether or not yo have the map-class. You can tell this by looking at the output of show frame-relay lmi. You'll see the lmi status frames being sent and recieved. The ...

Member Since	‎08-12-2002 08:00 AM
Date Last Visited	‎08-18-2017 03:55 AM
Posts	12

User Statistics

User Activity

IP Communicator / SPA504 / Call Connector working together

Call Routing on UC560

UC560 and adding 9 to missed calls

IP Communicator not working on different LANs

Polycom Soundstation2 integrated with Cisco UC560

Call Routing on UC560

UC560 and adding 9 to missed calls

IP Communicator not working on different LANs

Is it possible to connect two UC560's together

Re: Frame-Relay Keepalives and Static Routing Tables