Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello All,I am trying to enable policy based routing on a new 3560x switch.The device has the following code c3560e-universalk9-mz.122-55.SE1.bin and the IPSERVICES licenseI can create the route map in global config mode but when I try to enable pbr...
Hello thereI have got a problem with one of my asa's. It is in a ha setup. Whileattempting to wr mem, I received the following error:ASA(config)# wr memBuilding configuration...%Error writing disk0:/.private/startup-config (I/O error)Error executing ...
Hello there,I need a solution which sends all logs back to a single central location from all switches routers firewalls and so on.Now I thought this would be what the MARS box did, but I can't seem to find out how to see the actual syslog messages...
Hi there am having an issue with digital modems disconnecting on a cisco 2811. The router has PVDM2-36DM card and hwic-1ce1t1-pri E1 interface installed.The E1 is up and I can dialout but the calls drop after 24-30 secs.I have issued the debug modem ...
Hi Antonio ,I believe I have worked it out . It seems that unlike a standard router like asr or 2800 series, The 3650X does not support configuration of the commands" ip wccp" and "ip policy" at the same time under its interfaces.Therefore you can ...
Hello folks,I have found the problem.It seems that the software being used on the server to dial out to the remote devices required a modem initialisation string.We tested dialing out with a normal windows dialup connection and this work perfectly.
