Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello all. I've got an ASA 5510 that has been working like a charm for some time now. Until now we've not had to nat any resources to the outside. I created network objects for an internal host and an external host. The internal host has to respond t...
Hello all...I have a pair of C3750X's which are configured in a switch-stack (which is working as expected), but I'm having trouble getting them to join the same power stack. I have the power stacking cables connected in the following fashion: Switch...
Hello all. I have an ASA 5505 that has had a working configuration with several AnyConnect clients using dual authentication for weeks now. My normal process for adding new users has been to configure the user in both authentication databases and the...
Hello all,I have a catalyst 2960 (12.2(53)SE2) that I've added several mac ACL's to. This was almost 2 days ago, but this morning one host connected to a port where an access-group was assigned lost connectivity with the rest of the network. Connecti...
Hello all!I've got an ASA 5505 (ASA 8.2(3), ASDM 6.3(4)53 for which logging seems very slow.In the ASDM real-time log viewer, log entries come in spurts of 20, pause for a few seconds, then I get 20 more. The net result is that entries don't show unt...
Julio,Thanks again for your reply. Because this was time-sensitive, I opened a TAC with Cisco and they were able to resolve the issue. As you pointed out, the access rule on the outside interface needed to allow access to the outside interface its...
Thanks for the reply Julio. I tried changing the destination IP address in the ACL from my inside host to that of the external IP address of the firewall in the ACL and I still get the same denial message. Do you have any other suggestions?Thanks!
Just answered my own question. I decided to look at the Advanced/SSL Settings page and noticed the SSL version for the security applicance as a "Server" was set to TLSv1 only. I know I configured it that way at the time, but why working AnyConnect cl...
Bruno,A few days ago when I added your suggestions to my config, I added the ethertypes allowing ARP and IP to the mac for the printer, which was f4ce.4637.4337. This worked fine for the past couple days. This morning though, our JIRA server lost con...
Thanks for the suggestions. I've implemented your first suggestion (setting the ethertypes). I've also re-instated the access-list on the other node without setting the ether-types. Both are working for now, so I'm going to give them a couple days to...
