About goutam_04

goutam_04 · 06-05-2017

Hi, I have two 2921/K9 box which I want to run as active/standby and also I would like to run eBGP with my ISP and OSPF in LAN side. Do I need to buy DATA license? or is it fine with default image come with the box. Also want to implement QoS.

goutam_04 · 10-20-2011

Hi,I have configured Tacacs+ on my cisco 2901 router. Its working fine. But I would like to configure in a way that AD will Take preference than local user even login from console.Could you please help me in this.Thanks,Goutam

goutam_04 · 09-26-2011

Hi,I have installed a new cisco2901 router and configured the line vty 0 4 and console 0 and enable secret.But unfortunately I exit from the configuration and while going to login in again. I cannot login with username and password which is configur...

goutam_04 · 07-08-2011

Hi All,I have to install and configure two 2901 routers at different location with high availability. These 2 routers would be connected through WAN, now I would like to configure high availability bwtween two routers.I have attached a small diagram...

goutam_04 · 04-11-2010

Hi,We need to add a new IP range in the Network. In my network there are lot of Context in FWSM. Now to add a new network, I have created a new vlan and allowed to FWSM and same created in Context. but the vlan is not getting up in FWSM and Contex...

goutam_04 · 09-27-2011

Hi,Router is configured with the following command lines.line vty 0 4login localpassword XXXXXline console 0login localpassword XXXXsavedas the login is configured with local so we need to creat a local user and password for this to log in. But by m...

goutam_04 · 09-26-2011

Hi,There is no eject button, if you see the rear part of the router...there is a screw i think i need to loose that and press the card.pls. confirm.

goutam_04 · 09-26-2011

Hi thanks for your suggestion but I am having very little knowledge on Router hardware...so I would like to know...there are 2 CF (CF 0 and CF1) card is there in Cisco 2901. which one i need to remove and if I remove is there any chance to crash the...

goutam_04 · 09-26-2011

Hi,the document shows the process with ctrl+break option. but this command is not accepting by router through putty...i think there is a inbuild command in 2901 new router to denied this command.I have tried lot of times with break / pause option....

goutam_04 · 09-26-2011

Hi I am using putty to login console...I dont have the terminal window in my laptop.I have tried to switch off the router but the password promt is not coming. Its going to the normal username and password promt. and if i put the username and pass...

Member Since	‎02-01-2008 05:00 AM
Date Last Visited	‎08-18-2017 03:55 AM
Posts	157

User Statistics

User Activity

2921/K9 Licensing

Tacacs+ Configuration on Cisco Router

Password break for Router 2901

High Availability configuration between 2 2901 routers

new vlan creating problem in FWSM Context

Password break for Router 2901

Password break for Router 2901

Password break for Router 2901

Password break for Router 2901

Password break for Router 2901