About royalblues

Machine + User authentication in ISE · 02-28-2013

Is there a way to do machine and user authentication together in ISE without using Anyconnect?requirement is to identify a corporate asset based on a machine certiifcate and then provide granular acess based on user auth / certificateany links or gui...

royalblues · 05-15-2012

Can someone point me to a doc which states how to configure EM HA with CUCM ..This is what i need CUCM publisher at site 1 , individual subscriber at site 2 and 3 what i need is to have users at individual sites use their respective subscriber for EM...

royalblues · 07-05-2011

Can someone point me to a guide on how to configure shell auth sets in 5.2I have done it in 4.2 but can't seem to get it working in new versionRequirement is to just allow shut / no shut command but as soon as I give access to config terminal the use...

royalblues · 08-20-2008

Have anyone of you experienced high ASIC drops when QOS is enabled on a 3750?We have a 3750 stack acting as core which connects to call recording machine.. all the Voice VLAN traffic is spanned across to the port connected to the server.When i enable...

royalblues · 03-26-2008

Is there any suggested practical limit on the number of links that should be used as part of multilink?Any such information documented somewhere.One of our client already has 9 T1 in a multilink bundle and wants to add more. I see a lot of reordered ...

royalblues · 09-18-2016

you will need the AppX for all functionalities of IP SLA have a look here http://www.cisco.com/c/en/us/products/collateral/routers/4000-series-integrated-services-routers-isr/ISR-AX-Comprehensive-Ordering-Guide.html#_Toc351084728 HTH Narayan

royalblues · 09-18-2016

Indeed a good question As rick said the multicast mac will be maintained across the hop you can quickly lab it up and check Narayan

royalblues · 09-18-2016

Toby On the RP it will mostly show like this always as it not trying to reach a RP but it itself is this will be the case even if you have multicast traffic flowing across the router , something like this sh ip pim rp Group: 239.1.2.3, RP: 1.0.0....

royalblues · 09-15-2016

No specific limitation apart from the throughput of the platforms If you are using APIC-EM for iWAN provisioning then the ISRG2's (3900's) are supported only from 1.2 . the earlier versions of APIC-EM doesn't support them to provision as branch rout...

royalblues · 07-27-2015

you can use the critical acl feature on the switches which provides permit all access when the Radius servers are unavailableMore info on the below linkhttp://www.cisco.com/c/en/us/products/collateral/ios-nx-os-software/identity-based-networking-serv...

Member Since	‎03-14-2006 03:45 AM
Date Last Visited	‎08-18-2017 03:57 AM
Posts	3,061
Total Helpful Votes Received	2270

User Statistics

User Activity

Machine + User authentication in ISE

Extension Mobility HA configuration

acs 5.2 shell authorization sets

Execessive ASIC drops when QoS is enabled on 3750

Practical limit of number links in a multilink bundle

you will need the AppX for

Indeed a good question

Toby

No specific limitation apart

you can use the critical acl