Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have CAM and CAS failover bundle. 2 CAM and 2 CAS. I am purchasing a third-party Trusted CA. How many certificates will I need to purchase? Do I need 1 cert for all the servers, 1 per F/O bundle, or 1 cert per server?And can I use a private IP to ...
I have 2 6500/FWSM in multiple mode with 3 security context. I am sharing VLAN 800 as the outside of all 3 context. Context 1 and 2 are in failover group 1. However, I am not able to add the 3rd context to failover group 2. I received the following e...
Hello All,I configured a Clean Access Server for Out of Band deployment. I can't get the Nessus scanner to execute automatically after authentication. After authentication I should receive a scan notification page but I don't even get that page. I'm ...
I'm not using the Clean Access Agent only the user login page for guest access. However, I can't have any advertisement or affiliation on the login page.
You will need ASA ver 7.2 in order to do PPPoE. Also if it is a dynamic PPPoE connection, you may need the "setroute" command to set default route. See example below for dynamic PPPoE:interface Ethernet0/0 nameif outside security-level 0 pppoe client...
The biggest problem I see from a glance, you should put your VPNPool in another subnet besides the inside network (192.168.1.0/24).Also, your interface WirelessGuestLAN should be lower security level besides 100 (which is the same as your inside inte...
Are you planning to implement NAC Framework or NAC Appliance? They are very different and very different to implement. One may be a better choice than the other depending on your network.http://www.cisco.com/en/US/netsol/ns466/networking_solutions_pa...
