I have an existing catalyst environment running 802.1x for PCs, MAB for IP phones (PCs daisy chained) and a guest VLAN for unauthenticated devices, this has been in and working for may years. I now have a new requirement to add in a Cisco CBS350-48P ...
HelloWe have a central site which host a Virtual WLC and 5 or 6 remote offices each with a local Windows NPS authentication server used for a standard 802.1x SSID. This all works perfectly.However we encounter an issue when the WLC is offline, the re...
I am running Cisco ACS 5.1 802.1x with certificate based authentication for Wired and Wireless connections. The issue that I am having is that when a user comes in from home with their laptop the wireless connection works, they pass the authenticatio...
Thank you for getting back to me, very much appreciated.
I stripped back the configuration and removed all 802.1x bits and the phone and device work perfectly. To be clear, 802.1x works perfectly when devices are plugged into separate ports, both MAB...
HelloYes I do tend to use mac-move permit if laptop users are using wired, in a hot-desking sort of situation it allows a mac address to appear on multiple switch ports. In the ACS logs, does it tell you what subject is being offered up that is not f...
HelloIs this just one phone\port in a fully operational deployment or are you still trialling it on a few users?I think the next thing to do is clear the authentication on this port and unplug both devices. The run, debug authentication all, reconnec...
