Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,I'm just wondering if there is any documentation that confirms if the 2 built-in Gigabit ports on a Cisco 2851 router support (or otherwise) auto-mdix.I can find information for the modules but not the 2 built-in ports.Many thanks.
We have a pair of 6509 switches (running HSRP) which have redundant trunk paths to our VMware servers.There are 2 TMG boxes as guests on the VMware hosts currently using unicast NLB.I was looking into NLB Multicast but found out (http://etherealmind....
Hi all,I've got an ASA 5510 running 8.4(2) with ASDM 6.4(5)205 and an AIP SSM-10 running 7.0(6).About 2 weeks ago we had an unscheduled reboot on the ASA and since then I have been unable to connect to the SSM using ASDM.Direct SSH access to the SSM ...
Hopefully someone will be able to help me, I am unable to get the IPS signature autoupdate working on our ASA 5510. We have a valid support contract, our username does not incude and special characters and I am able to download the signature files fr...
We have a 5510 which we have purchased an AIP SSM-10 card for the ASA which is already under a support contract. We now wish to add hardware maintenance for the new AIP SSM-10 card as well as signature updates. Our Cisco supplier will not confirm tha...
Hi Giuseppe,Thanks for the reply. From what I've read SLB can operate in 2 modes - directed and dispatched mode.Although dispatched mode would be preferable given the lower resource usage I don't believe it would be the correct option for us - correc...
Hi svaish,I've not got an old config to hand for it unfortunately.The SSM is pingable and I can SSH in ok from the same workstation. I had a look at the config and I've got an "access-list" entry for the internal IP of the ASA (/32) as well as the wo...
Hi Bob,Thanks for the reply - it got me thinking about how it was actually getting the update.I needed to modify an ACL and add a PAT for the sensor management IP as I've tied down the hosts that can get out.It's now showing that it is attempting to ...
