Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hiwe have cisco UC540 (8.2)Extension 390 has an AutoAttendant script on CUE.After initial greeting on 390, a call is being forwarded to the extension 280 (B-ACD queue)If we make calls from the local IP-phone to extension 390, everything works fine.If...
I connect to my Cisco UC540 remotely through VPN and use Cisco Communicator. This works fine, however once I connect to VPN, internet slows down significantly. Is it possible to setup the phone through VPN and the rest of the traffic through my local...
Hello,I'm trying to setup phone SPA 525G2 as a teleworker phone on my Cisco UC540. While I'm in the setup master, I'm being offered to install an SSL client bundle (AnyConnect) or to download it from the Cisco website for those who doesn't have it. T...
Hi GuysThe similar question is posted in another thread, but it is still unanswered. I have the same problem herehttps://supportforums.cisco.com/message/1181435?tstart=0 I work out of a Help Desk that supports about 40 VOIPs. I've just found five bad...
Hi, I've just purchased a UC540 unit from Amazon. Do I need to purchase a service plan for this device to get access to the CISCO download center(for any software updates) ?Do I need the service plan to get updates for the device?
Thank you very much for the prompt reply. I found this option and once I turn it on, the system asks me to enter 'network' and 'wildcardmask' information. I'm not very good with this, so could you please advise me on what needs to be entered here. M...
I've done hardware reset many times and it doesn't help at all. They download the file term70.default.loads, restart and next they are supposed to download another 7 files, but they don't do that. Instead after restarting they downlaod term70.default...
Thank you for the detailed response, but it looks like my knowledge is not enough to go through the whole process. As far as I understand phoneload is already on the flash card, but the phones still don't grab sccp firmware.
