Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all, I guess I'll start with the easy stuff, Cisco ASA 5520 ver 8.2, ASDM ver 6.2, IPSec L2L tunnel with overlapping private IPs.I have about a dozen L2L connections on our 5520 but never had to do one with overlapping IPs. I have two that I have ...
Hi all, I hope I'm posting this to the correct area, please do let me know if this post would be more appropriate in another area.We have deployed 3560s with IOS ver 12.2 <25> sec. in our distribution closets and have engaged port security on all of ...
Hi gang, Not looking for anyone to hold my hand, but sure could use some advice.We're working through our deployment of a guest WLC. Our anchor WLC is in our DMZ. The management and AP-Manager are on the same subnet. The Dynamic "VLAN" interface is o...
Hi Jose, Thank you for the reply.As I try to become a better technician It's important to me to "get things right" if you know what I mean.And know the terminology and what it actually means is a big part of that I think.The ASA is just taking me lon...
Thanks again.Could you answer a basic terminology question?When are talking about the inbound or outbound direction of packets, are we talking in reference to the ASA?So if for instance I had an "outbound ACL" that I applied to the inside interface, ...
Andrew, In a word... THANKS !!!Your explanation did help a great deal, thank you. I've read so many different, and sometimes conflicting, posts about NAT that I have totally confused myself on the issue.I think when my Big book arrives today I'll try...
Hi Andrew, Thanks for taking the time to respond to my post. I honestly do appreciate the help, you have no idea how much I've been stressing over this. OK, so is my basic understanding about the relationship of the interfaces in the translations cor...
Hi D, First, thank you for taking the time to reply. I did enable logging, but the log file didn't contain any information that would indicate a captured MAC.A (sho port-security address) only results in displaying the MAC of the sticky printer, not ...