About Christian Osburg

Christian Osburg · 07-03-2008

Hello @ all,first - sorry my english isn't very good.On a Cisco 876 Router with Cisco IOS Software: C870 Software (C870-ADVENTERPRISEK9-M), Version 12.4(6)T6, RELEASE SOFTWARE (fc2)i've got the following problem:In sporadic intervals, but very often ...

Christian Osburg · 01-18-2008

Hello Indy,i've got a similar problem last year.The answer of the problem was the ip tcp adjust-mss config on both sites. I think i changed the tcp adjust-mss on both sites to 1500.Maybe you can change the tcp adjust-mss in the dialer and vlan interf...

Christian Osburg · 06-06-2007

Hello mrjaylewis,can you please post the output from "debug ip packets detailed" "debug ip routing st r 0.0.0.0 0.0.0.0""debug ip nat detailed"while you send ICMP signals e.g. ping from the client to the router? After you do that please post the outp...

Re: VPN Users and HTTP auth-proxy · 06-05-2007

Hello Ash,can you post the relevant auth-proxy Access List's for:corporate LAN -> Web-ServerVPN network segment -> Web-Serveron the C827:Home LAN -> VPN network segmentbecause I think, that any ACL kills the authentication signal or so.Have the C827 ...

Christian Osburg · 06-03-2007

Hello,here's the output from the "atm vc-per-vp" command:Lena(config-if)#atm vc-per-vp ? 32 VCs per VP 64 128 256 512 1024

Christian Osburg · 06-03-2007

Hello,on my 876W I can configure atm vc-per-vp 512 and 1024 but 1024 is the maximum.Kind regards,ChristianThis helps, please rate post if it does!

Member Since	‎04-06-2007 10:40 AM
Date Last Visited	‎11-08-2019 12:03 AM
Posts	9
Total Helpful Votes Received	15

User Statistics

User Activity

Cisco 876 - Connection Loss

Re: IPsec VPN Problem

Re: ios vpn, no traffic to client, nat or acl problem?

Re: VPN Users and HTTP auth-proxy

Re: PPPoA on Cisco 800 series

Re: PPPoA on Cisco 800 series