About jwcasey007

jwcasey007 · 12-27-2011

I see a few questions and responses around call restrictions indicating that in Fall 2011 a firmware upgrade was to be released providing call restricions (ie allowing an extension to be restricted to local calling only). Has this been released yet ...

jwcasey007 · 08-15-2011

I want to use both Sage CRM (https://supportforums.cisco.com/docs/DOC-9778) & SCC-Advanced/SCC-Operator on a UC560. Is this possible or am i truly limited to one application at a time?Thanks

jwcasey007 · 09-14-2010

Folks-This community has been most helpful with this door entry system we are doing for this customer. We have one last hurdle:Right now we have the door entry system programmed as one of the buttons on the 7962 phone. If they need to open the door ...

jwcasey007 · 09-08-2010

We've installed a Viking RC3 to handle remote door entry with the 540 product line. Right now the Viking answers and then waits for the Cisco to enter digits, but the Cisco has already sent them.. I need it to wait to send the digits to triger th...

jwcasey007 · 08-17-2010

Hello All -We have a customer who runs a clinic where he needs a door latch system. The client will NOT have a pager at the door - the receptionist will need to physically see the patient walk to the door, then "Buzz" it open.We can permantly design...

jwcasey007 · 08-18-2011

Thanks David - Any idea if the basic SCC Toolbar will function with the TAPI in use by the CRM? (http://www.cisco.com/en/US/prod/collateral/voicesw/ps6882/ps10585/data_sheet_c78-601646.html)

jwcasey007 · 09-08-2010

worked like a champ!! Thanks!

jwcasey007 · 09-08-2010

FXS. Config attached.

jwcasey007 · 09-07-2010

Paolo,we got the Viking RC3:http://assets.twacomm.com/assets/pdf/4378.pdf What we need to know now is:I have it to the point where the Viking RC-3 answers, but it then beeps twice and waits for the caller to enter digits to trigger one of the three ...

jwcasey007 · 08-17-2010

I see you posted this on another similar Q:http://www.sandman.com/pdf/Page40.pdf Would this DTMF relay allow me to program a particular button on the specific phone to always open the door WITHOUT an intercom device?

Member Since	‎08-10-2009 12:51 PM
Date Last Visited	‎08-18-2017 03:51 AM
Posts	37
Total Helpful Votes Received	5

User Statistics

User Activity

UC320 - Call Restrictions

SCC-Advanced & CRM

Door Entry System on UC540/560

UC540 Delay Sending Digits

Door Entry System

SCC-Advanced & CRM

Re: UC540 Delay Sending Digits

Re: UC540 Delay Sending Digits

Re: Door Entry System

Re: Door Entry System