Introduction :The objective of this document is to show how prefix lists work and how they differ from access-lists. Access-lists are very common used for security, filtering , qos etc. Prefix
The feature for forwarding a range of UDP ports is not supported on Cisco devices.
An enhancement request has been filed
for this already.
Details of the enhancement : NAT implementation to support port-range forwarding
Symptom:
Impossibility...
Not sure what the requirement is, so it would be great if you could elaborate a little more.From the bgp config , you are establishing an ebgp neiborship and advertising a network to the neighbor.
You just need two routes pointing out through the 2 wan interface. (assuming you are using static routes). ex:ip route 0.0.0.0 0.0.0.0 ip route 0.0.0.0 0.0.0.0 show ip route for a destination will show two paths. The path with * will be the best rout...
From what I see this is the track you have configured,ip sla 1 icmp-echo 10.10.10.2 source-interface Dialer3 timeout 1000You are tracking 10.10.10.2 and I guess you do not have a route to 10.10.10.2 but the default route. So, when you remove that def...