Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All, We currently have a Cisco 5525x with 10 context, and am looking to put a secondary 5525x as a HA. So both to run both context as active active. The primary ASA is up and running. So what is needed to get the other 5525x which is not configure...
Hi All,We have two WiSM2 in our 6500 Core switches.We are looking for resilient between them.Both 6500 have “Supervisor Engine 720 modules - WS-SUP720-3B”One WiSM2 has 100 AP licenses with 7.6.130.0 and both WiSM2 has 300 AP license with 7.4.110.0....
Hi All,I have two question, We have upgraded all our 4 x 5508 WLCs from 7.4.110.0 to 7.6.130.0 afew weeks ago.1. We have BOYD Wifi where we have two WLC are front end (where the APs join) and two in the DMZ are anchors.On our BOYD Wifi its WPA+WPS2...
Hi All, We currently have 4 x WLC 5500 (AIR-CT5508-K9) V01 and V02So two in one datacenter and the other two in another datacenter. They are connected via Mobility group to and BOYD open wifi with an Anchor WLC the other 1.All four of them are 7.4.1...
Hi All,I need your help. I reset a AP via our WLC as the 80211b/g/n radio was operation status down, but the AP has not joined the WLC again, its got the same DHCP ip address, but here is the error msg ive got;(Cisco Controller) >*spamApTask2: Nov 10...
Hi Mike, I have one more question.As the Actice/Active with be multi-context.Each context has its own inside and outside ip addresses. like Inside interface has sub-interfaces on G0/1 with a private ip and all contexts have their own public on their ...
Hi Aaron and all, In our environments we have 2 x WiSM2, on one 7.4.110.0 and other on 7.6.130.0.We are having problem to SSH or webconsole to both WiSM2. With 2x 5508 as Anchor for BOYD.We are looking to upgrade the one which has 7.4.110.0, reading ...
