Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I need this switch in vlan 119 for management. Can someone tell me why when I pass the no shut command on int vlan 119 that I lose the switch entirely? It is uplinked off of a cisco sg300
Cisco WS-C2950T-24 Switch uplink port and vlans interface G...
How can I go about changing the management IP on a 3750. I need to get it out of VLAN1 entirely. I need to put it on VLAN 11. The trunk to my router is set to switchport trunk encapsulation dot1q which I believe means to tag the packets to VLAN1?
int...
I have a site with a cisco 3750 stacked x6 with a meraki MX84. I really need to understand what options I have for inter-vlan routing so that vlan119 nodes can reach the internet. Currently they cannot unless I use a gateway of 10.140.92.1 which is ...
I have clients on an edge switch that cannot seem to be able to use a default gateway of 10.3.92.254. The current state is one that we are migrating from which has everthing in vlan1. Those clients use 172.16.0.2. Can anyone tell me what am I missing...
Hi, I would appreciate any help I can get on this problem. I have a WS-C3750X-48P-S core that I am having some trouble with.
My goal is to move clients on VLAN1 (172.16.0.0/16) to two new vlans , vlan11 and vlan119, thats one for server and one for...
Thanks for the reply. Would I need to change any ports with:
switchport trunk encapsulation dot1q
to:
switchport trunk encapsulation dot1q switchport trunk native vlan 11
I would like to have the routing at the core. Your answer makes sense. In order to make routing work as expected with a L3 switch, I will need to ditch the vlans on the Meraki MX appliance, and replace them with static routes pointing to the interfac...