Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,Can you try by configuring 'access-group input PERMIT-ANY' on interface vlan 106. By default, ACE will Deny all Incoming traffic on an Interface unless you specify Permit ACL.Hope this helps,Best Regards,Rahul
Hi Karim,This alarm could be due to Malfunctioning Memory module or the slot.Do 'show hardware' or 'show memory' to check total running memory for the WAE. Check syslog if you find any memory related error messages.If the memory has failed then you w...
Hi Thibault,We did some more testing and its definately a new bug in SV1(4) as you have pointed,We have filed a New bug "CSCtn75755 - Username with more than 8 characters logins but has limited CLI access" for this issue.This will be fixed in next ma...
Hi,You will need to download WAAS Recovery ISO from CCO. Please follow below steps,1) Download the WAAS recovery CD from Cisco CCO. It will based on Software image you want to download,For example WAAS 4.2.3 - Image name is "waas-rescue-cdrom-4.2.3.7...
Hi Wim,Lets says you want to restrict access to Client with Source IP 1.1.1.1 then you can configure Class-map to match on Source IP,class-map type http loadbalance match-all Source-IP 2 match source-address 1.1.1.1 255.255.255.255And apply it to Po...
