About aadhu1

aadhu1 · 11-04-2015

Hi Guys, i am having issues with registering the AP 1602 controller based to the catalyst 3850 controller , below errro is what i am seeing in the consol aedub1-sw-core-1(config-if-range)# *Nov 4 11:56:13.323: %ILPOWER-7-DETECT: Interface Gi1/0/37...

aadhu1 · 02-24-2014

Hi Guys, i would need help on the transilation rules for eg. the ip phone extension of mine which is 86128 should be seen to other end as 12386128 and that too i need only for one site office , i had tried transilation-rule which says rule 1 /^86.....

aadhu1 · 11-11-2015

HI Manannalage, i upgraded the IOS on the switch successfully and all working well , but the AP's still have joined the controller and i am getting the same error as before ... any other solution you could think of ...

aadhu1 · 11-09-2015

ok , sure will do the upgrade , just asking cuz of curiosity ... is that a reason for the AP's not registering to the 3850

aadhu1 · 11-09-2015

Hi Manannalage, i had chnaged the country from US to AE now , and is showing as chnaged in the config , but still have the same error .. as you said to upgrade the IOS-XE too which i havent done yet , but do that really help , cuz for changing i ne...

aadhu1 · 11-08-2015

Hi, please see below 3850 aedub1-sw-core-1#sh verCisco IOS Software, IOS-XE Software, Catalyst L3 Switch Software (CAT3K_CAA-UNIVERSALK9-M), Version 03.02.03.SE RELEASE SOFTWARE (fc2)Technical Support: http://www.cisco.com/techsupportCopyright (c) ...

aadhu1 · 11-07-2015

Hi Stephen, tried that but still no joy ... actually the initiall config were without that and i added thinking it might help , now its local cert auth is been taken out ... any other thoughts why the AP's not joining ... below is whats been showin...

Member Since	‎03-06-2007 02:26 AM
Date Last Visited	‎08-08-2018 12:02 AM
Posts	10

User Statistics

User Activity

AP LW 1600 not joining to Controller in Catalyst 3850

Add Prefix to local extension when making VOIP calls

HI Manannalage,

ok , sure will do the upgrade

Hi Manannalage,

Hi, please see below

Hi Stephen,