Hi,
You can use policing or shaping for outbound and shaping Inbound direction based on the traffic inspection using NBAR.
Note: NBAP can cause CPU issues.
Thanks
Hi.
You can use MST instead.
Also you can check the following article that will help you understand the concepts better of keep rstp with rapidpvst.
https://www.alliedtelesis.com/sites/default/files/howto_aw-_config_pvst_interop_cisco_revb.pdf
Please...
Hi
You can use subinterfaces on ASA and encapsulation for each vlan you want. You can do it based on the following example:
interface GigabitEthernet0/0 no nameif no security-level no ip address ! interface GigabitEthernet0/0.10 description outside...
Hi James,
1. Please check the traffic from 50.199.17.17 to 72.34.95.210 where it goes. Do a trace route to 72.34.95.210 and verify if it goes to 210 OR to .211(capture on firewall) and then to 210
Note: Maybe the return traffic flows from 50.199.17.1...