Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,Below are default inactivity connection time out for A3(1.0) So by defult any tcp connection(http or https) will be timed out in an hour.The defaults are as follows: •ICMP—2 seconds •TCP—3600 seconds (1 hour) •UDP—120 seconds (2 minutes) as ...
Hi,We have a Cisco WS-C6509 catalyst based switch with two WS-F6K-MSFC2 for L3 activity.This switch has been behaving wierdly.One of the abnormality is the EIGRP SIA issue. Below are the details on the OS and the module details.show moduleMod Slot Po...
Hi,There is problem in Cisco unified wireless deployment in my scenario. There a multiple locations in the environment and hence we had to implement separate WLC solutions for each location. In the same we implemented different unique SSID in each lo...
Hi,In a H-REAP solution with central authentication and Local switching, do we have any fallback method of authentication in case of the controller failure or WAN link to controller fails. Like WPA/WPA2 PSK authentication for the H-REAP LWAPP in stan...
Hi Pablo,Thanks for the confirmation. I need the same scenario, along with the port monitoring on the real servers. Is it possible?Can monitor few required ports and load balance on the Layer 3?merci,arun
Steve,You are the PRO, +10 for this. Just for confirmation i'm repeating my setting, please let me if it would work.SSID: CISCO_PRODOne profile, one SSID, with WPA2 802.1x auth mapped to Vlan 100(local wireless user vlan). DHCP override not required,...
Steve,There is setting to have the DHCP server override in the advanced tab of WLAN config. I have a local DHCP server in the HREAP for providing IP for the HREAP clients. And i have set that in the DHCP server override option for the HREAP SSID, now...
