About Claudio Minnetti

Claudio Minnetti · 07-07-2015

Goodmorning,The network architecture in objet has been described here below:The system is composed by 1 main site and more than 20 remote sites connected geographically by a VPLS Network provided by the National ISP. In each location a couple of Cisc...

Claudio Minnetti · 06-11-2012

Hi all,please refer to the drawing attached below:R1-R3: Cisco Router 1841R2-R4: Cisco Router 3945All the routers are configured with PIM Dense Mode and OSPF.PC1 is generating multicast data flow x.x.x.x and PC2 PC3 receive that multicast. They send ...

Claudio Minnetti · 03-16-2012

Hi All,I reported a really strange issue on a Cisco Router 3945. Here below info about release software used:IOS:C3900-UNIVERSALK9-M, Version 15.2(2)T, Release software (fc1)ROM: System Bootstrap, Version 15.0(1r)M13, release software (fc1)System ima...

Claudio Minnetti · 03-20-2012

Dear all,I solved that issue with a downgrade of the IOS. Now I'm using a:c3900-universalk9-mz.SPA.151-3.T2and all the access-list are working properly and also txload now is 1/255.Probably the IOS C3900-UNIVERSALK9-M, Version 15.2(2)T has got a bug ...

Claudio Minnetti · 03-20-2012

Dear Marko,I confirm that value. Even if I disable the access-list applied in that interface and there is no data traffic through it the txload is 255/255. I found that value not only in fa0/0/1 interface but in all the interfaces of that router.Cla...

Claudio Minnetti · 03-20-2012

Dear all,I tried to apply the access-list also to other interfaces (on board as gi0/1 or in another HWIC-2FE as fa0/1/0) but the issue persist. Then, I erased the PBR configuration and the problem persist again.Here below I report "show ip int fa0/0...

Claudio Minnetti · 03-19-2012

Dear Vasileios,the interface is working properly without the access-list applied.Thank youClaudio

Claudio Minnetti · 03-19-2012

Dear Richard,The fastethernet interface is a HWIC-2FE mounted into Cisco router 3945. Here below the "show ip int fa0/0/1":Router_1#show ip int fa0/0/1FastEthernet0/0/1 is up, line protocol is upInternet address is 10.255.1.252/24Broadcast address is...

Member Since	‎03-16-2012 07:52 AM
Date Last Visited	‎04-09-2018 07:38 AM
Posts	8

User Statistics

User Activity

Flapping WAN links - 100% CPU usage routers effect

IP Mroute Expires Timer - PIM Dense Mode

Acess-list issue on Cisco Router 3945

Acess-list issue on Cisco Router 3945

Acess-list issue on Cisco Router 3945

Acess-list issue on Cisco Router 3945

Acess-list issue on Cisco Router 3945

Re: Acess-list issue on Cisco Router 3945