Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am trying to get a permit statement to log an event to a syslog server. Other events from the ASA are showing in the syslog server. I changed the logging level on the permit statement to Warnings but it did not help. Permit statement:access-list EO...
Hello
We are migrating from a pair of Cat 6500s to a pair of Nexus 7700s. The 7700 switches are configured with a Layer-2 peer-link but there is no Layer-3 link between them (with the exception of the peer keep-alive connection). We are have some d...
I followed the upgrade manual and ran the 2 scripts (jeos-20.1.2-0.lnx64.zip and jeos-30.0.4-0-lnx64.zip). Neither rebooted the host automatically. I did a manual reboot but the Software Update tab does not appear. I tried this a couple of times wi...
I have been testing a tunnel between a ASA 5510 version 9.1(7)4 and a ASA 5525-X version 9.1(2). The tunnel establishes with IKEv1 but I can not get it to work with IKEv2. I have enclosed the debug crypto ikev2 platform 127 & debug crypto ikev2 pro...
We are running Cisco PI 2.2, build 2.2.0.0.158. I have two 3848 switches that have a collection status of SNMP Connectivity Failed for some reason. We have several other switches with the same model and OS versions. The log on both switches have e...
We use the firewall between different VRF's. In this case the "Default_VRF" is the interface on the ASA to the VRF where the syslog server resides. The ASA is sending properly to the syslog server as I can see some messages. I just can't seem to get ...
TAC had me upgrade to LMS 3.2.1 for a separate RME problem I was having. This version has resolved both problems. So I am to assume there was a bug in the 3.0.1 version of the software that was causing the Syslog filter issue.Thanks for all the hel...
All set...hope I did it correctly. It was a little difficult to determine in the AnalyzerDebug.log where to cut the entry but I think I got it all.Thanks againJamie
