Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
The UC560 auto attendant prompts often slowdown in speed. When callers reach the auto attendant, the voice recording often times sound very slow. “Thank you for calling our company”, sounds like T---h---a---n---k--- y---o---u--- f---o---r--- c---a---...
To reset the CUE-GUI pin.In CLI, access the CUE. (int ser 0/0 session)log in with your privilage 15 username/password (default is cisco/cisco)in the exec mode (if username is cisco)typeusername cisco password ciscoThis will change the password to cis...
The Telco is incorrect. With only two FXO lines open, there is no path for the third call. For small systems of two lines, I recommend to the client to use the Telco voicemail (on the lines). Place the lines on a set (As Co Type Lines) so the client ...
I have remote phones working on the UC500.In the CCA, go to VPN Server. Allow split tunneling, add the networks you need to reach. I always add 10.1.1.0/24, 10.1.10.1/24 and 192.168.10.0/24.Then your computer must have the Cisco VPN Client installed....
Yes, just build dial peers that include the four digits, ex. For all 4000 ext's at site B. You might use 4**. I use H323, and for ip server, point to the ip address of site B. On site B, create the inbound dial peer that accepts the 4**. Sent from Ci...