Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Recently my company upgraded IOS on several hundred Cisco 2651XMs from 12.2.37 to 12.3.22a and we started having problems with some 50+ sites still on ISDN BRI as backup. We use dialer interface as multilink PPP logical interface. So on actual BRIs o...
Recently my company upgraded IOS on several hundred Cisco 2651XMs from 12.2.37 to 12.3.22a and we started having problems with some 50+ sites still on ISDN BRI as backup. We use dialer interface as multilink PPP logical interface. So on actual BRIs o...
I have to configure QoS on 3550 to identify and tag voice traffic with real-time priority (dscp 46) and rest of the traffic with default priority (dscp 0), so just need two queues, one with 90% bandwidth for non-voice traffic and 10% for voice traffi...
module compatibility is one thing... i wouldn't recommend an E3 on any 2600 series routers. ask any Cisco Sales Engineers or independent sales engineers.
@marwanshawi: so that means just enabling strict priority queuing would put queue 4 in higher priority? but how about any kind of bandwidth allocation? I just want to make sure that non-voice traffic does not bleed into voice queue. strict priority q...
from what I recall, 6509VE chasis has all line cards vertically while 6509E has them horizontally. If you get the old 6509 chasis make sure you have correct power supply because sup32 and sup720 are incompatible with some old 6509 chasis power supply...