Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I must be having a thick moment. Are all the ports on the 24LC capable of POE but the limitation is that the switch can only support 4 ports due to power max at 60w? Also, is the way to set POE on a port to set the port to an Access Point? The who...
Hello, I've hit a problem with a Cisco 877w dot11radio interface which is incosistent with the Cisco AP config. In summary I have 2 SSID's and 2 Vlans bridged. Association works fine to both SSID's and no connectivity issues when no encryption set....
Need some advice, I have 2 SSID's set on the dot11radio0 interface each on a seperate vlan with mbssid set. All works fine. I can associate ok to either and vlan trunking is working. Whenever I power down the AP for any period of time and restart,...
I've come across some strange router behaviour to do with dialer persistant...One of our customers requires the following solution:-A router supporting a standard ADSL connection, but with an audio modem backup - so that connectivity can be maintaine...
Rob,Thanks for your input. You are correct that I only want to guest broadcast the homenet SSID. The strange thing is that with using Netstumbler when I first build the AP config I can see both SSID's and connect to both without issue. When I have...
I turned on the additional debugs, as requested - please see attached file.(Its from a different router with identical hardware/slightly different IP - but behaviour is identical)>Does the ISP check for multiple MAC addresses on the same line - as yo...
