I have an ASA 5520 placed between two different networks and have to provide interconnectivity between them. The ASA is placed between two Layer 3 switches. I had configured ASA as below:interface GigabitEthernet0/0 //(Outside)nameif Network-2 secur...

HiI have a MCS 7815 with preloaded CCM 5.0 and 50 Cisco 7940 IP phones.With the basic configuration all 50 IP phones are communicating fine. My problem is, I am unable to activate the messages and "help ?" key. What configuration should I do in the C...

I have a 6509 switch with VTP mode as server. There are 20 no's of 2970 switches connected to it with VTP mode set to client and all switches are in the same domain. All the switches are trunked using dot1Q encapsulation and are communicating good ...

I have a single Cisco CallManager 5.0 installed on MCS7815 with static IP address configured on it.I could successfully Upload CCM server License and 200 Device Licenses for 50 7940 IP phones.One of the 7940 phone was added in the CallManager through...