About manufc

manufc · 11-20-2007

Hi all,Thanks for reading this:I have an ACS server version 3.3.1 in Win2003 standard SP21: Is it possible for a person to have read only access to the ACS server to view system configuration, interface configuration, network configuration etc ?2: Is...

manufc · 09-05-2007

Hi everyone,This is wierd, campus manager is reporting a device is on a switch port, but the switchport has been shutdown for a long time.00-08-02-8a-0c-03 pc123.core.local 10.50.170.202 10.50.168.0/21 <device> Fa0/10 XP_Client_LAN_2 30 Aug 2007, 13:...

manufc · 07-02-2007

Hi,I think there may have been a post about this before, but I'm unable to find it.Is it possible to have the different applications of Ciscoworks such as RME, Common Services and Campus Manager to allow them to open the different elements of the ind...

manufc · 07-02-2007

Hi,I'm running RME4, Common Services 3.0.5 and other apps running on a high spec server with tons of space.The current settings for most of the log file sizes is 30000 bytes and log file status shows some logs exceeding this limit.Is it possible to c...

manufc · 06-19-2007

Hiya,I have a number of devices that are listed in Common Services/DCR/"Devices not configured in ACS."I can see these devices are not configured in a Network Device Group in my ACS server, which I believe explains the above. This occurred from a bul...

manufc · 02-12-2008

Hi,So if I understand this correctly;Outside is 192.168.0.254/24DMZ1 > NAT source IP to 123.123.123.0/24Are there any ACL's preventing DMZ2 from being visible?This doc may be helpful;http://www.cisco.com/en/US/customer/tech/tk648/tk361/technologies_t...

manufc · 02-12-2008

Hi,It looks like you need more config under the crypto map, here's an example;crypto map description set peer set transform-set match address ...otherwise I don't see how the interesting traffic is going to get encrypted.Also, how does the cisco ...

manufc · 02-11-2008

Hi,Depending on your version of IOS, you can script commands using kron.Cheers

manufc · 02-11-2008

Hi,Here's my observations;Your dialer interface would be better off configured with a static IP address, it's cleaner and easier, don't rely on DNS and you know what the IP is for troubleshooting and SSH access.You have ip http server enabled but not...

manufc · 11-01-2007

Hi,There's a couple of things you can do:1: If the device is added without an IP address, and if DNS is configured on cw2k, then add the device to DNS so it can be resolved.2: The only other way is to disconnect cw2k from ACS by selecting cw2k to be ...

Member Since	‎04-27-2007 01:06 AM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	17
Total Helpful Votes Received	9

User Statistics

User Activity

ACS Administrator Access

Campus Manager - Ciscowierdyworks

Ciscoworks and browser windows

CW2K Log file size

how to delete devices from Common Services/DCR

Re: ASA - Advertising NAT addresses into OSPF

Re: VPN between Draytek and Cisco877

Re: Terminating an IPSec tunnel,

Re: VPN between Draytek and Cisco877

Re: how to delete devices from Common Services/DCR