Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a 3400ME 12CS 4SFP Metro switch connected to a 7606 Cisco router via a dot1q trunk port. On the 3400's port facing the 7606 I receive valid but too small of frames (or undersized frames). The 7606 shows RCV-errs because of the Input queue show...
We provide Layer 2 connectivity for p2p and p2mp customers. We use 375012S, and 3400Me for our Aggregation switches and 3650G's for CPE's/edge switches. On the Agg switches we can have several different customers hanging off. My question is: I need a...
Give this a shot on the ME3400, it seems to work for me. ME3400 pppv policngclass-map match-any Police10Mb-VLAN match vlan 2180class-map match-any Police20Mb-VLAN match vlan 2123policy-map 10mb-child-vlan class class-default police 11000000 exceed...
Here is the 7606 (WS-X6548-RJ-45) phy port config. It is set to trunk mode on as well is the 3400 trunk interface.interface FastEthernet1/20 description Trunk to 3400ME GE0/10 no ip address switchport switchport trunk encapsulation dot1q switchport t...
Thanks to both of your responses I appreciate it. I replaced the 3400ME with a catalyst 3560 and the problem continued. The MTU sizes have been set to 1518 actually, and the problem continues.
