Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,I have a VoIP network made of a gateway-CME with an E1 30 channels to the PSTN and dial peer voip sending out an E1 data towards another CME and IP phones.I have no voice issue except when both talker of a call speak at the same time.When they ...
Hello,I have couples IP Phones on a LAN. This LAN also contain some web and FTP servers.This LAN connects to a WAN connection SHDSL 2Mb/s (in fact 1780..).I haven't any QOS possibility on the modem wich connect the LAN to that SHSDL line. So I 'm thi...
Hello,OER process will go inactive as soon as there aren't at least 2 up external interfaces anymore. And this is quite normal. If there is only one available external interface no choice of outgoing interface is possible So the master process goes ...
Hi Hieu,Thanks for responding.I implemented LLQ out the EI data (toward the other CME) on each side of that E1 128Kb/s by the way. Working VOIP calls with G729r8 in between CMEs, I have made a Priority class in a policy reserving a strict priority of...
Hello,I'm trying myself to use OER.1. In the MC configuration, internal and external interfaces are of course the one from the border(s) routers. In your case, you need to use a loopback address, since the router is the MC and the Border with the min...
Hi,I'ld be really suprised to not be able to configure a strict priority queue on a 3750 router.You might already know this but we never know.. there is one sure thing :You cannot implement a policy containing a strict priority queue on the INPUT of ...
Hello,Last Post tought you the right vision. Resolving QoS issue on the outgoing interface is really the only efficient way to optimize the treatment of differents traffic flows without adding more delay..To go further, you would configure LFI mechan...
