Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all,I'm requesting your help regarding the Transceiver integration within Cisco 3945.I need to supervise the DOM (Digital optical monitoring) capability of LX laser integrated within CISCO 3945.But after study of the Cisco DataSheet on transceive...
HiI've got a cisco 3825 and I would like to send syslog messages to a server located into a VRF with a loopback1 as source-interface.The problem is when I want to set up the loopback1 as source-interface I got this error message :"Interface Loopback1...
Hi,Here is my architecture :CISCO(3825)------FIREWALL-IPSEC----PASSPORT(7480 Nortel)---[WAN (E1_link)]----My Passport provide a link to the WAN, It's a E1 link providing a 2048 kbps ATM link.Cisco and Firewall are connected with a 100Mbps IP link.I n...
Hi,I've got a problem to import dynamically a route from a global routing table to a VRF.So here is my configuration :ip vrf TEST rd 1:1 import ipv4 unicast map IMPORT interface Vlan1 ip address 192.168.1.1 255.255.255.0 ip policy route-map IMPORT ro...
Hi,We have the following problem :We have two sites, site A and site B which are interconnected as following :(Site A)--Router A---Firewall A---------WAN--------Firewall B---Router B-----(Site B)The two routers are 3825 Cisco Routers.On each of these...
Joseph and Laurent are all right. Performance of layer 3 switch cannot be compared to router performance. So, I feel rassured to get such result, I will get 3825 and 2811 routers in the next weeks.So, my tests should be much more efficient.I received...
Hi,Thanks for all your responses. Here is some precisions on the tests I made :I used IXIA 400T tool (http://www.ixiacom.com/products/chassis/display?skey=ch_400t) to do my test.This product can determinate the available bandwidth on the link you tes...
