About bradwilson

bradwilson · 11-28-2001

Problem Description: on initial configuration after setting up the vlans on a cat 6509 the msfc card shows no interfaces> after entering the command> (config) int vlan 1> (config) ip address 10.1.5.1 255.255.255.0> (config) no shut> the interface ...

bradwilson · 11-27-2001

Do I need to reload the boot flash to fix this issue.?

bradwilson · 11-28-2001

I have disabled VTP Pruning and am still unable to route. Still having a problem with " DOWN/DOWN" status on the vlan 1Thank You. Brad

bradwilson · 11-28-2001

Can you explain exactly what you mean by "pruned".? Would I check this from within the router mode. I have a sup in slot one and slot two.

bradwilson · 11-28-2001

How can I verify that my config register is 0x2102

Member Since	‎11-27-2001 02:57 PM
Date Last Visited	‎08-18-2017 03:51 AM
Posts	5

User Statistics

User Activity

No Interfaces enable on msfc on 6509

6509 with prompt. Router(boot)

Re: No Interfaces enable on msfc on 6509

Re: No Interfaces enable on msfc on 6509

Re: 6509 with prompt. Router(boot)