Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Everybody,Maybe this subject was already discussed and a solution exist, but a could find it in any discussion.I setup a site to site VPN between 2 sites ( HQ_ASA <--- VPN ---> Site_ASA). the inside subnet for each site is nated before reaching th...
Hi EveryonesI create a network infra with BGP and EIGRP. There is 5 routers, The connection between R1 and R2 is BGP. R2, R3, R4 and R5 are EIGRP. The configuration is done and the ping works well only R1 can't ping R5 ( R5 can ping R1 ). I upload th...
Hi everybody,Currently, I have to replace a faulty power switch on a 3750 that indicated that the RPS is not functional. thats the situation of the system power :mtl4c1r1cs3750-1#show env allFAN 1 is OKFAN 2 is OKFAN PS-1 is OKFAN PS-2 is OKTEMPERATU...
Hi,The depicting in R1 gave me the solution. I discovered that I forgate a loopback1 in R1 with the IP address 10.1.5.1, the same subnet like the loopback0 of R5 10.1.5.5.After I deleted it, the ping from R1 to R5 works properly.Thanks Lot.
Hi Guys,After a long discussion with the architect, I convinced him not to replace the power supply because the indicators on the console shows no abnormal situation. just the problem of monitoring Thank you very much for your information even if th...
