About tomytek0709

tomytek0709 · 07-24-2014

I am trying to set up a VPN to an ASA5540 with a static IP address from a Juniper SSG5 with a dynamic IP address. I have tested the configuration from an ASA to ASA and it works fine. When I try to connect with the Juniper SSG5 it does not work. I...

tomytek0709 · 06-13-2012

I have ESXi 4.1 installed on B200 M2 blades in UCS. I can ping the IPs of the ESXi hosts from my computer and ping my computer from the ESXi hosts. I can't connect to any of the ESXi hosts from my computer with the vSphere client. I cannot even ge...

tomytek0709 · 07-24-2014

Below is the config of the ASA. This works fine from another ASA, but does not from the Juniper SSG5.interface GigabitEthernet0 nameif outside security-level 0 ip address 10.1.1.2 255.255.255.252 !interface GigabitEthernet1 nameif inside security-le...

tomytek0709 · 06-14-2012

Thank you for providing a detailed methodology to help troubleshoot this. Below is a screenshot of the tcpdump when I try to access using http. Below is a tcpdump when I try to access ESXi using the vSphere client.Below is a screenshot of the log ...

tomytek0709 · 06-13-2012

Thank your for the response. There is no firewall between UCS and my computer. When I telnet using with port 80 and 902, I get a response. I tried restarting management services through the console, but it still does not work. Is there something ...

Member Since	‎08-19-2010 07:00 AM
Date Last Visited	‎08-30-2018 08:29 AM
Posts	5

User Statistics

User Activity

Dynamic VPN From Juniper SSG5 Uses DefaultRAGroup

Cannot access vSphere ESXi host on UCS

Below is the config of the

Cannot access vSphere ESXi host on UCS

Cannot access vSphere ESXi host on UCS