About JolietJake

JolietJake · 03-26-2008

Hi,Just wondering if I'd lose any signal strength if I was to mount the AIR-ANT2506 in the up-side-down position.The reason I want to do this is that currently we have an AIR-ANT2506 mounted to the side of an outdoor enclosure, where it sits raised a...

JolietJake · 04-09-2008

fella5,Thanks for your reply.So the antenna's don't have to be spaced by multiples of the length of a radio wave, just so long as the antenna's are at least 1 wavelength and no more than 4 wavelengths apart?So for example, I could space my antenna 1....

JolietJake · 04-08-2008

I have a question...Say I've got a 1230 AP, and I'm going to use two AIR-ANT2506 antennas in diversity configuration. The antenna's will be seperated by more than 4.92 inches, but do they have to be seperated by multiples of 4.92 inches, or can I mou...

JolietJake · 04-02-2008

Look into a company called PagePac.We have used their Australian arm to integrate paging into our CCM environment. We configure an ATA with a DN, say 300 and whenever anyone wants to use the paging system they dial 300, the paging system plays an 'at...

JolietJake · 03-26-2008

Thanks Rob,I think I'll try getting the AP enclosure lowered rather than mount the antenna inverted.

Member Since	‎05-23-2007 01:31 AM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	5

User Statistics

User Activity

AIR-ANT2506 ... Can it be mounted up-side-down?

Re: Cisco 1250 dipole antenna spacing

Re: Cisco 1250 dipole antenna spacing

Re: Paging using the phones?

Re: AIR-ANT2506 ... Can it be mounted up-side-down?