Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all, I have an 3850 WLC with 16 access-points. After restarting the 3850 WLC or an power down the radio interfaces of the access-points are down when the WLC is restarted again !If you connect via https you can see that the network status of the r...
I have a ACS cluster combination with primairy and secundairy ACS (5.3). Both ACS nodes are moved from one location to an other.Name wise the names of the ACS nodes should be renamed cause it is build with it's location code. The secundairy ACS is re...
Hi Rasika,Thanks for your help. I did the radio interfaces manualy shut/no shut and it was working.Now I implemented the EEM script. I will test it when possible cause it is operational at the customer. Thanks....Huub
Hi all, It took some time but I changed the names of the ACS cluster without any problems. This with help of you all. I have added the steps I did which were working fine for me.Thanks for your help 1) Check database backup2) Change Log collector...
Thanks Neno, I'm gona check the points you mentioned. I'm thinking about it and will create a plan to do.I will let you know what the results are. Kind regards, Huub
Hello Nicolas, I want to change the hostname for two ACS nodes which are a cluster together.It is an distributed deploment (primairy and secundairy). Do you have any procedure for doing this? I can't find anything what the consequens is for doing thi...
