Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,1. Set a Static IP2. Apply & Save Configuration3. After Reboot the IP is correct.Then do Reset to Defaults Except IP in the WEB Gui.After Reboot the AP loos the static IP and get a DHCP Address.Reset to Defaults Except IP = Reset to Defaults !W...
HelloMy Configuration is:15 AP(1240AG 12.4(10b)JA ) 1x WLSE-1.1-HW (2.15.1u).One of the 15 AP is the local radius and the wds.Wds and radius works fine. All AP registered in wds.My Problem:After upgrade the wlse of version 2.15.1u the WLSE does no...
Hello,i have installed the Spectrum Expert Software on my Dell Latidude D520 Notebook.The Card ist correct installed to.(Control Panel --> System --> Hardware)But if started the software the software hang up and do nothing.I can stop the software wit...
The Version is: ap3g2-k9w7-xx.152-4.JB3aIt´s definitly a gui related bug.Insted a "reset to defaults except ip" i load a default config with correct ip settings.Hope this bug will be solved in the future.
Thank you Rasika,Here is the BVI1 after Reload.BVI1 is up, line protocol is up 1 00:00:29.675: not a autoconf Hardware is BVI, address is 10f3.11c2.2e3a (bia 10f3.11c2.2e3a) *Mar 1 00:00:31.675: %LINK-6-UPDOWN: Interface Gigabi Internet ad...
Here is the show ip dump:show ip interfaceBVI1 is up, line protocol is up Internet address is 10.16.33.100/23 Broadcast address is 255.255.255.255 Address determined by configuration file MTU is 1500 bytes Helper address is not set Directed bro...
OK, here is:Writing out the event log to flash:/event.log ...*Jan 22 17:44:56.675: %SYS-7-NV_BLOCK_INIT: Initialized the geometry of nvram*Jan 22 17:44:57.547: %SYS-5-RELOAD: Reload requested by on console. Reload Reason: Reload Command.Write of eve...
