I want to integrate a PBX Philips Sopho with a Cisco CME setup using an E1 (QSIG) connection to the PBX. I'm getting this error from debug:Jul 5 09:08:50.808: ISDN Se0/0/0:15 Q931: RX <- SETUP pd = 8 callref = 0x5F00 Bearer Capability i = 0...
Ok, re-configured the isdn switch-type to be primary-net5 and everything now works.Anybody know if there are any issues with runing a CCME system with a net5 connection?
IOS versino 12.4(11)XJ3, with CUME 4.1I'm calling from an exchnge number 2456, to 1000 which has been assigned to the CCME. As you said, there isn't a 'Called Party Number' there.