Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
On installing the CiscoWorks Small Network Management Solution 1.5, an installation error box appears titled "openssl.exe - Ordinal Not Found".The error says that "The ordinal 968 could not be located in the dynamic link library LIBEAY32.dll."When I ...
Dear all,I have a 1760 router with VPN Accelerator module inside and I have configured things like GRE Tunneling, IPSec 3DES, CBWFQ QoS and policing on the serial interface and I want to figure out if the router is doing CEF/Fast/Process switching.I ...
I'm configuring CBWFQ and trying to protect a certain type of traffic. I put the following configuration to test and use an ftp server as the target.interface Serial0/0 no ip address encapsulation frame-relay load-interval 30 no fair-queue frame-rel...
I have a Catalyst 4006 running IOS and I want to configure policy routing on it.I have configured the following:ip access-list extended policyroute-acl permit ip host 10.26.186.162 10.26.171.0 0.0.0.255 permit ip host 10.26.186.178 10.26.171.0 0.0.0....
I have an ATM 1p 622M module in a Cat 6500 switch. I tried to set the clock of the ATM module using clock set command as in other IOS device, but the command simply doesn't get recognized.How to set the clock of the ATM module? It's now incorrect a...
Sorry for the belated reply, just back from vacation.I've tried the procedure more than a couple of times, but still no luck. Do you have any other insight?
