lauekh
Level 1
Level 1
Member since ‎12-05-2001
‎08-18-2017

User Statistics

  • 19 Posts
  • 0 Solutions
  • 0 Helpful votes Given
  • 0 Helpful votes Received
Recent Badges
5 Discussion Posts
First Discussion
First Question
10 Discussion Posts
1 Reply
5 Replies

User Activity

On installing the CiscoWorks Small Network Management Solution 1.5, an installation error box appears titled "openssl.exe - Ordinal Not Found".The error says that "The ordinal 968 could not be located in the dynamic link library LIBEAY32.dll."When I ...
Dear all,I have a 1760 router with VPN Accelerator module inside and I have configured things like GRE Tunneling, IPSec 3DES, CBWFQ QoS and policing on the serial interface and I want to figure out if the router is doing CEF/Fast/Process switching.I ...
I'm configuring CBWFQ and trying to protect a certain type of traffic. I put the following configuration to test and use an ftp server as the target.interface Serial0/0 no ip address encapsulation frame-relay load-interval 30 no fair-queue frame-rel...
I have a Catalyst 4006 running IOS and I want to configure policy routing on it.I have configured the following:ip access-list extended policyroute-acl permit ip host 10.26.186.162 10.26.171.0 0.0.0.255 permit ip host 10.26.186.178 10.26.171.0 0.0.0....
I have an ATM 1p 622M module in a Cat 6500 switch. I tried to set the clock of the ATM module using clock set command as in other IOS device, but the command simply doesn't get recognized.How to set the clock of the ATM module? It's now incorrect a...
Community Statistics
Member Since ‎12-05-2001 12:41 AM
Date Last Visited ‎08-18-2017 03:51 AM
Posts 19