Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,Here is the problem scenario. The IPT installation was running fine with 7960 and 7920 and ATA devices installed to a Callmanager Express 4.1. Later we needed more wireless phones, so ordered the new 7921 phones as 7920 phones are no loger in ...
Hi,We have WS-C3550-24-EMI. We are currently running 12.1(14)EA1. We upgraded the IOS to 12.2(40)SE and we are encountering this following warning :!!! WARNING: The switch is not usable !!!Reason: Device test failed for CAM mask read Also we observed...
Hello,There have been a couple instances (on difference 5509 switches) where aswitch port that is being configured as a trunk have fallen out and reverted back to it's native VLAN. When this occurs, the commands to configure the trunk port are no lo...
Hello, I have two routers A and B. Router B is able to place ISDN calls successfully into Router A but Router A unable to place ISDN calls and upon reviewing the debug outputs in Router A, I see the disconnect cause is 0x82BF which suggests local Tel...
Hello,I have two routers A and B. Router B is able to place ISDN calls successfully into Router A but Router A unable to place ISDN calls and upon reviewing the debug outputs in Router A, I see the disconnect cause is 0x82BF which suggests local Telc...
Hello Jorge,Yes there is no problem with the RAM and Flash Requirements. However as you said it really its unclear why there is POST failure with the desired image. Anyways I would keep you posted. Rgds,Arindam
The one which we are using is c3550-i5q3l2-mz.121-14.EA1 and the one where we are encountering problem is c3550-ipservicesk9-mz.122-40.SE.binThanks,Arindam
Hello Jorge,Thanks for your prompt reply. Well after encountering the said error message under show version, I have fallen back to the earlier IOS 12.1(14)EA1 and things started working fine. Could you please throw more lights into this why I am enco...
