Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,The aim is to set up site to site VPN with a vendor. That is not an issue. The question that I am not familiar is setting up encryption domain in this particular scenario.The vendor has to manage our device that has private IP address (10.x) but f...
We are doing a site survey for wireless infrastructure. Redundnat controller implementations is what we are looking at. We were informed about using 2 controllers for redundancy but now during site survey, it has been informed that a different versio...
We have 4 12xx APs managed by a 1206 WLC. On the WLC, the only thing that I see are WEP decrypt errors. We are a manufacturing company (steel) and there is certainly lot of electricity used in the mill during arcing process. There have been certain c...
COnfigure the second controller to be in same mobility group as first one (it is under the controller tab).A good idea is to have the second controller in the same subnet as the first one. What method are you using to let APs know of the controller I...
Scott,Thanks for your answer. I would need some additional assistance. I have heard conflicting stories where one side stating that Cisco is moving in the direction of implementing seprate controllers for mesh and non-mesh APs while another side sayi...
