When we disable SmartPort on an SG 300 Switch we notice that under Smartport -> Interface Settings... it still shows all ports with 'Smartport Application' setting as Auto Smartport on all ports. We were assuming it set every port to disabled??So ar...
Hi there,I have what I thought would be a simple ACL. See the attached overview. I have applied an ACL to a port connected to a Dell switch. All the machines on this Dell switch live on the 172.10.x.x network. I have a single server (on another s...
Out of 5 switches that we have installed so far, 4 of them have removed all tagged VLANS from our trunk ports and left only the default VLAN on the port. This is quite the inconvenience for us since we have17 switches to upgrade and most of them are...
Hi Mikhail,One issue we have found is that going from 1.3.0.62 to 1.3.5.58 causes our Trunk ports to revert to a single VLAN (the default VLAN). We tested the upgrade remotely on a switch about 10 miles away and discovered this. We now will have to...
Hi Tom,I couldn't help but notice you said it "should" not require disabling each port. Do you (or Cisco if you are listening) know for sure if the global setting disables it for all ports? Sorry to be picky but this caused a big issue for us so we...