Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Group, I am having an issue with applying nested QoS policy to an interface and not seeing the packets placed in the strict priority queue. Here is my configuration:class-map match-any WAN_Egress_Cisco_Voice_Signaling match ip dscp cs3class-map m...
Hi Group, I am trying to use the following QoS policy on Catalyst 3560 (more details attached): policy-map IPPHONE_WITH_USERPC class Voice_Media set ip dscp 46 police 256000 16000 exceed-action drop class Nortel_Voi...
Hi All, I'm trying to configure a sticky policy to make HTTP sessions from Mobile Users to stick to the WAP Server they were served before. The IP-addressing based sticky policy is not ideal as the Mobile Users can roam around and use a different IP-...
Group, I am trying to setup a Port-Channel between Cisco 7600 and Sun CT900 which has CP3140 switch, but it is not working. It seems that Sun switch is sending "Fast" LACPDUs while Cisco 7600 is sending "Slow" LACPDUs (as shown below). Is there a way...
Thanks much Joseph. I suspected that this is what the case is. The original policy is for a DS3 link on a customer's 7206VXR but I am simulating this for a serial interface in the lab environment. Personally, I think we don't need to shape a DS3 link...
SW versions:============C7606-1#show mod | inc SLB 1 4 SLB Application Processor Complex WS-X6066-SLB-APC SAD0744050PC7606-1#show mod Mod Ports Card Type Model Serial No.--- ----- -------...
Folks - I upgraded the code to 4.2(6) and thought that bug CSCei26434 was solved, but still see the same error where CSM is not balancing properly. No Traffic Running:===================C7606-1#show mod csm 1 serverfarms name WHTTP detail | inc OPER ...