Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,We have a Wireless solution that currently has 10 AP's (1242's).They connect via Trunk ports on each local switch and everything works fine.However, moving forward we are running out of addresses on the ManagementVLAN (native) and have to insta...
We only have around 400 Cisco devices to monitor on our Local LAN. It is a Hospital environment and we could do with the best product for the right money. We are considering CiscoWorks LMS however on closer reflection we already have NI Observer and ...
I have an issue with three switches at work all are cisco 3524's. Every Friday the same 3 switches drop off of snmp monitoring only for a matter of seconds but every friday without fail.Nothing shows up in the local log files on each device.....or on...
Does anyone know!We use WDS and will soon go over the 60 AP's supported by WDS per master access point.How do I configure this guys/girls? It seems that everything works great on the native vlan its just when you come to move to a seperate vlan as th...
Alex,We are running WDS and have no WLSM on our 6500. We also run WLSE.You need to set one AP up as the Master in the SWAN infrastructure and another as the Backup. I have found this document that may be useful for you.http://www.cisco.com/en/US/prod...
The closest match I could find was this.....%MLSCEF-2-FIB_SSRAM_WRITE_INCONSISTENCY : FIB SSRAM Mismatch for Index: [dec]Expected: [hex], Hardware: [hex] Explanation A problem occurred when the system attempted to write the FIB SSRAM. Recommended ...
