I have 14 Branch location. I wants to connect all locations throught lease line with 64 or 128Kbps. Head off I have 3825 router with HWIC-4A/S or NM-4A/S module & Branch have 1841 with WIC-1T or WIC-2A/S.1. I wants to ask this setup will run???2. I ...
Our compnay is going to open 5 branch off. Till now we dont have any connectivity between branches. We wants to connect all branches with VPN. Which is best setup for VPN, give me 3-4 options, so I will select according our budget.
I hv 2 MB Internet lease Line. ISP has given me public IP of serial port for router, Gateway public IP & six public IP.Now I wants to configue Internet for our LAN(private ip). How to do this pls guide me in configuration of router.Its urgent for me....
We are going to start new setup for our head off.Ours head off hv around 125 users & around 30 users hv mobility. I wants to setup VPN for mobile user. How I can do that, what all device need to install. only router or pix or asa pls advice me for o...
Our head off we have 2811 router using class C IP Addressing. Five branches are connected through head off through lease line. Head Off LAN can use only 254 host now host are going to increase, how I can do this. Experts can u guide me.Regds
Andrew,WIC-1T card can support 64 or 128Kbps ???What u think abt MPLS solution. We hv the budget. I dont know much abt MPLS which module we need for MPLS,which router??? etc etc pls give me some idea.Regds
Viyuan,Boss if I do this config Internet is workingethernet...public IpSerial.... Public Ipip route 0.0.0.0 0.0.0.0 gateway ip Only these three commands..Internet is working n pinding to DNS, Gatway etc etcBut when I put do this config internet is no...
Viyuan,My router hv IOS 11.3 this....... Router(config)#ip nat pool netview........ command is not working. its giving error on poolRouter(config)#ip nat inside source 1 pool netviewits giving error on 1How to do????? pls help me out. pls tell soonWa...
See ISP gave me one public IP for serial int & one for gayeway. So I put that public ip to serial int & gave one privte ip to ethernet.ip nat inside for ethernetip nat outside for serial intfaceip access-list 1 permit anyip nat inside source list 1 ...
