Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
- Cisco Community
- :
- About Edison Ortiz
10-12-2018
Edison Ortiz
.jpg){kind=icon}
Hall of Fame Mentor
Routing and Switching, CCIE # 17943
Cisco Advanced Services
One Penn Plaza, New York, NY 10119
Awards
1
Hall of Fame Hall of Fame
Recent Badges
Stats
Member since
07-12-2007
8920
Posts
8556
Helpful
1219
Solutions
03-04-2014
10:21 AM
.217 keeps showing up in your ARP table. Have you identified this device? Can you ping it? You need to verify why .1 is not responding to pings. If that device is owned by the ISP, you need to work with them.
... View more
03-03-2014
07:03 AM
If you can't ping from the BVI interface to the local device, it's not a NAT issue. Verify the ATM is working and the BVI interface is up/up.
... View more
03-03-2014
06:58 AM
Per router configuration, it seems you have a very small subnet in the LAN segment. What's the IP address from the device you are trying to ping the server from? If you have other routers, they need to have IP reachability to the 192.168.1.0/24 segment Also, this router needs to have IP reachability to theirs. Regards,
... View more
03-03-2014
06:48 AM
It seems your IPSec Tunnel is not up. I noticed your Branch router gets its IP address via DHCP from the ISP. This IP address may change without notice and you have static configuration for your IPSec. Verify the IP address referenced in the configuration matches the IP address from Dialer0. Regards,
... View more
Created by
Edison Ortiz
in Switching
Edison Ortiz
in Switching
02-28-2014
07:08 AM
02-28-2014
07:08 AM
The output indicates it will change on the next reload (at least switch 02). Give it a try.
... View more
02-28-2014
07:03 AM
So you are trying to access the internal IP address via the VPN or via an internal host? If so, it could be an issue of allowing that communication via the VPN. Check the VPN ACL and make sure this flow matches.
... View more
02-28-2014
06:52 AM
No configuration is required. Verify the internal interface configuration for ACL preventing access and/or IP subnet configuration.
... View more
02-28-2014
06:49 AM
For DC WAN Edge, a 2951 may be too slow and CPU may be impacted with high BGP table + throughput demands. I recommend going with an ASR.
... View more
02-28-2014
06:35 AM
You need to configure WCCP inbound on Router A with the interesting traffic ACL and make sure to have the ironport configured for L3 return. This book covers some of this detail http://tinyurl.com/mngykqx
... View more
02-28-2014
06:17 AM
70mins may not be enough if ISP B is not a 'tier 1' provider. A non-tier 1 provider will rely on tier 1 providers for subnet propagation. As long as you own the ASN, changing it shouldn't be a problem.
... View more
02-12-2014
08:31 AM
John, http://www.cisco.com/web/services/portfolio/optimization/network-optimization-nos/index.html
... View more
02-12-2014
08:29 AM
Leo, the upgrade process isn't time consuming. What is time consuming is the politics involved for any upgrade in today's network. That's the reason the Network Optimization Team made that comment. You are a lucky person to have that kind of liberty - upgrade the entire network without filing a ton of paperwork. As for the use of NOS, they/we don't just provide IOS recommendations. There are more services such as: Design Assistance/Review, Software Recommendation, Field Notice/PSIRT advisories, Protocol/Technology Audits, HW End-Of-Life review/report and more. Be sure to make use of them.
... View more
03-04-2014
.217 keeps showing up in your ARP table. Have you identified this
device?Can you ping it? You need t...
03-03-2014
If you can't ping from the BVI interface to the local device, it's not a
NAT issue.Verify the ATM is...
03-03-2014
Per router configuration, it seems you have a very small subnet in the
LAN segment.What's the IP add...
03-03-2014
It seems your IPSec Tunnel is not up.I noticed your Branch router gets
its IP address via DHCP from ...
02-28-2014
The output indicates it will change on the next reload (at least switch
02).Give it a try.
02-28-2014
So you are trying to access the internal IP address via the VPN or via
an internal host?If so, it co...
02-28-2014
No configuration is required.Verify the internal interface configuration
for ACL preventing access a...
02-28-2014
For DC WAN Edge, a 2951 may be too slow and CPU may be impacted with
high BGP table + throughput dem...
Created by
Edison Ortiz
in Routing
02-28-2014
02-28-2014
You need to configure WCCP inbound on Router A with the interesting
traffic ACL and make sure to hav...
Created by
Edison Ortiz
in Routing
02-28-2014
02-28-2014
70mins may not be enough if ISP B is not a 'tier 1' provider. A non-tier
1 provider will rely on tie...
02-12-2014
John,http://www.cisco.com/web/services/portfolio/optimization/network-optimization-nos/index.html
Public Statistics
| Date Registered | 07-12-2007 11:38 AM |
| Date Last Visited | 10-12-2018 12:22 AM |
| Total Messages Posted | 8,920 |
| Total Helpful Votes Received | 8556 |
Helpful Votes Given To
| User | Helpful Count |
|---|---|
| 20 | |
| 5 | |
| 20 | |
| 5 | |
| 5 |
Helpful Votes From
| User | Helpful Count |
|---|---|
| 5 | |
| 5 | |
| 5 | |
| 5 | |
| 5 |
Awards
Hall of Fame
