Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Following scenario:R3-----R4 ¦ ¦R1 R2R1 and R2 are propagating a redistributed (static) default route to R3 and R4. R3 and R4 now get each 2 default routes. Only one is installed in the eigrp topoloy database. This one goes to the main routin...
Is there a feature that allows hsrp hellos running over a different link? I'm thinking about 2x2600 with each one serial and one ethernet interface. They are both connected back-to-back with the two medias. HSRP should be configured for ethernet but ...
Make sure that Speed/Duplex are the same on the switch. Should be fixed to 100Mb Full Duplex. Differencies between switch and pix could easily lead to performance issues.If you still have throughput problems, consult Release Notes of your OS release ...
Situation has changed (don't know why). Following output if I shutdown link on R3 pointing to R1:----------------------------------------------------IP-EIGRP Topology Table for AS(3000)/ID(193.178.156.3)Codes: P - Passive, A - Active, U - Update, Q -...
Thanks. I just found another approach with introducing two additional routers. This solves the problem. Trying to let HSRP running over serials is anyway crazy...
