Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
When trying to import an Ekahau Site Survey into Catalyst Center the floor map imports but the AP's and RF info are not on the map. The AP's and RF spectrum show up on the Ekahau Survey within Ekahau AI Pro and I can obviously manually add the AP's t...
Hi dzwissler1,
The title of this discussion is misleading. Just to summarize earlier posts, this is about starting a 1562 bridging mesh. Once the AP is on the WLC, then you have to ensure that your WLC has a recent code to put the AP into bridge ...
Even with mesh, it will run PoE. Just make sure that you have a good UPS on the switch. If you get a power hit, then you'd have to wait for the switch to load and then for the bridge to come back up (20-30 mins). I trust my switch power over a wal...
Hi AJ,
Yes, unfortunately you'll have to upgrade to 8.5. If you do, also make sure that you load the bundle to the WLC. For my test switch, a 3750X, we had to force the wattage due to another issue (fixed with "power inline static max 30000" to g...
But once the 1562 is in local mode, it won't bridge. I changed my mode to local, and now I can't change back to bridge (there's no ap-type bridge command on the AP), and there's no bridge mode option under the AP config after the AP joins the contro...
